Thermal insulation & refractory supplier for United States
The United States has the world’s largest refining and petrochemical capacity, concentrated on the Gulf Coast between Corpus Christi and Baton Rouge, plus a fleet of LNG export terminals and a booming data-centre market. Specifications are almost always to ASTM, with NIA MICA practices for installation.
What United States projects need.
The industries below drive most insulation demand in United States; the products recommended further down follow from them and from the local climate.
Key industries
Industrial centres
- Houston
- Baton Rouge
- Lake Charles
- Corpus Christi
- Chicago
- Philadelphia
- Los Angeles
Climate: Subtropical
Warm, humid summers and mild winters: cold lines need condensation control in summer, while outdoor hot systems need weatherproof jacketing against rain.
Materials most specified for United States projects.
Ranked from the industries and climate above. Every item links to its full datasheet.
Rockwool Pipe SectionFor refining
Calcium Silicate Block & Pipe SectionFor refining
Aluminum Cladding Sheet & CoilFor refining
Cellular Glass Block & PipeFor petrochemicals
PUF Pipe Section & BoardFor lng & gas processing
Ceramic Fiber Blanket & BoardFor refining
Nitrile Rubber TubeFor data centres
Castable RefractoryFor refiningPorts, route and documents.
Destination ports
- Houston
- New York / New Jersey
- Savannah
- Norfolk
- Los Angeles / Long Beach
Sea route
North American cargo moves via the Suez Canal or the Cape of Good Hope to East and Gulf Coast ports, or across the Pacific via Asian hubs to the West Coast.
Transit times and schedules are confirmed with each offer.
Documents & compliance
Every shipment travels with a commercial invoice, packing list, certificate of origin and bill of lading; manufacturer test certificates and data sheets are available on request. Ocean shipments require an Importer Security Filing (ISF “10+2”) by the importer before loading; we supply the shipment data needed on time.
Standards commonly specified
All 32 products we export to United States.
Product names buyers use locally, HS codes for your customs broker and rated service temperatures.
| Product | Also known as | HS code | Service temperature |
|---|---|---|---|
| Hot Insulation | |||
| Rockwool RB Slab | rock wool slab, mineral wool board, resin bonded rockwool | 68061000 | up to 650 °C |
| Rockwool LRB Slab | light resin bonded mineral wool, semi-rigid rockwool slab, mineral wool lamella | 68069000 | up to 450 °C |
| Rockwool LRB Roll | rockwool wired mattress, LRB mattress, wire mesh rockwool blanket | 68061000 | up to 650 °C |
| Rockwool Pipe Section | rockwool pipe cover, mineral wool pipe insulation, rock wool pipe lagging | 68061000 | up to 650 °C |
| Calcium Silicate Block & Pipe Section | calcium silicate pipe insulation, calsil block, hydrous calcium silicate | 68062000 | 40 °C → 1,000 °C |
| Ceramic Fiber Blanket & Board | ceramic fibre blanket 1260, refractory ceramic fiber, RCF blanket | 68061000 | up to 1,400 °C |
| Cellular Glass Block & Pipe | foam glass insulation, cellular glass pipe insulation, closed-cell glass block | 70080010 | up to 430 °C |
| Maftec / Maftac Ceramic Fiber Blanket | bio-soluble fiber blanket, AES blanket, low bio-persistent fibre | 68061000 | up to 1,260 °C |
| Removable Insulation Jacket | removable insulation jacket, valve insulation cover, flange insulation blanket | 68069000 | −50 °C → 550 °C |
| Aerogel Blanket | aerogel insulation, silica aerogel blanket, thin high-performance insulation | 68069000 | −40 °C → 650 °C |
| Cold & Cryogenic Insulation | |||
| Nitrile Rubber Tube | NBR insulation tube, elastomeric foam pipe insulation, closed-cell rubber insulation | 40091100 | −40 °C → 105 °C |
| Nitrile Rubber Sheet & Roll | NBR foam sheet, elastomeric rubber sheet, self-adhesive rubber insulation | 40081190 | −40 °C → 105 °C |
| PUF Pipe Section & Board | polyurethane pipe section, PU foam insulation, PUR slab | 39211390 | −180 °C → 100 °C |
| PIR Board | polyisocyanurate board, PIR insulation panel, foil-faced PIR | 39211390 | −180 °C → 140 °C |
| XPS / EPS Board | extruded polystyrene board, expanded polystyrene sheet, polystyrene foam board | 39211100 | −50 °C → 75 °C |
| Glass Wool Roll & Blanket | fiberglass insulation roll, glass wool blanket, FRK faced glass wool | 70198000 | −10 °C → 230 °C |
| Refractory & Castables | |||
| Fire Clay Bricks | firebrick, refractory brick, IS 8 fire clay brick | 69029010 | up to 1,400 °C |
| High Alumina Bricks | alumina refractory brick, 70% alumina brick, high alumina fire brick | 69022020 | up to 1,750 °C |
| Insulating Fire Bricks (IFB) | IFB brick, lightweight insulating brick, 26-grade insulating brick | 69010010 | up to 1,650 °C |
| Basic / Magnesite Bricks | magnesia brick, basic refractory brick, mag-chrome brick | 69021010 | up to 2,000 °C |
| Silicon Carbide (SiC) Bricks | SiC brick, silicon carbide refractory, SiC refractory shape | 69022040 | up to 1,800 °C |
| Castable Refractory | refractory castable, low cement castable, LCC castable | 38160000 | up to 1,800 °C |
| Refractory Mortar | fire cement, high alumina mortar, refractory jointing mortar | 38160000 | up to 1,700 °C |
| Ramming Mass | silica ramming mass, induction furnace lining, dolomite ramming mix | 38160000 | up to 1,750 °C |
| Cladding & Accessories | |||
| Self-Tapping Screw | self drilling screw, cladding screw with EPDM washer, hex head roofing screw | 73181400 | Accessory |
| Insulation Band & Buckles | SS banding, stainless steel strapping, insulation strap and wing seal | 73269099 | Accessory |
| Aluminum Cladding Sheet & Coil | aluminium jacketing, aluminum insulation cladding, stucco embossed aluminium sheet | 76061190 | Accessory |
| Sealants, Tapes & Adhesives | |||
| Aluminum Foil Tape | aluminium foil tape, duct foil tape, reinforced foil tape | 76071994 | −20 °C → 120 °C |
| Silicone Sealant | neutral cure silicone, weatherproof sealant, cladding joint sealant | 32141000 | −40 °C → 300 °C |
| Contact Adhesive | rubber insulation adhesive, NBR glue, elastomeric insulation adhesive | 35061000 | −20 °C → 90 °C |
| PVC & Cloth Insulation Tape | PVC insulation tape, cloth duct tape, pipe wrapping tape | 39191000 | −10 °C → 105 °C |
| Butyl Mastic Sealant Tape | butyl tape, mastic sealant tape, butyl rubber sealing strip | 39199090 | −30 °C → 90 °C |
Buying from abroad for United States.
Do you deliver insulation and refractory to United States?
Yes. We quote to Houston, New York / New Jersey and Savannah on FOB, CFR or CIF terms, or EXW/FCA for your own forwarder. North American cargo moves via the Suez Canal or the Cape of Good Hope to East and Gulf Coast ports, or across the Pacific via Asian hubs to the West Coast.
Which documents come with a shipment to United States?
Every shipment travels with a commercial invoice, packing list, certificate of origin and bill of lading; manufacturer test certificates and data sheets are available on request. Ocean shipments require an Importer Security Filing (ISF “10+2”) by the importer before loading; we supply the shipment data needed on time.
Which standards do projects in United States usually specify?
Projects in United States commonly reference ASTM, ASME and NIA MICA manual. Every product page lists the ASTM, EN and other standards its data refers to, and test certificates can be supplied with the order.
Can you supply sites in Houston, Baton Rouge and Lake Charles?
Yes. Tell us the site and the nearest port — we quote to that port, to an inland depot where services exist, or to your own forwarder. Mixed loads of insulation, refractory and accessories can travel in one container.
Planning a project in United States?
Send the specification, quantities and delivery port — we reply with a priced export offer, packing list and HS codes ready for customs in United States.